Our defines were never clear between what meant 64bit or x86_64
This makes a clear cut between bitness and architecture.
This commit also has the side effect of bringing up aarch64 compiling support.
These directories have been unused for several years and without any automated
way of running the tests, they are pretty much useless.
While they might be useful as a reference, in their present state they should
not be kept in the repository.
The default async api allow us to set some latency options. The old one (simple API) was the lazy way to go for usual audio where latency doesn't matter.
This also streams audio, so it should be a bit faster then the old one.
This branch is the final step of fully supporting both OpenGL and OpenGL ES in the same binary.
This of course only applies to EGL and won't work for GLX/AGL/WGL since they don't really support GL ES.
The changes here actually aren't too terrible, basically change every #ifdef USE_GLES to a runtime check.
This adds a DetectMode() function to the EGL context backend.
EGL will iterate through each of the configs and check for GL, GLES3_KHR, and GLES2 bits
After that it'll change the mode from _DETECT to whichever one is the best supported.
After that point we'll just create a context with the mode that was detected
Also define _M_* in a common location, and clean up code that these
changes break (including DSPJit files that assume X86 yet are compiled
on ARM for some reason...)
is at least 1.8 and has the methods of glew 1.9. This is an annoying
hack to deal with Ubuntu's glew setup, which is glew 1.8 with 1.9
methods patched in.
- Make "copy data into bundle" depend on the files actually being
changed, rather than being run on every build.
- postprocess_bundle depends on system files and checking the Dolphin
binary and all that, and would be iffy to try to avoid rerunning;
but it's only needed to produce a redistributable bundle, so add
SKIP_POSTPROCESS_BUNDLE to skip it for development.
Feedback is in logs as suggested by skid_au. The checkbox is still there, but
mostly for people who would like to opt out (unfortunately, I can not be sure
how this feature may behave for some routers - there's a hell of a lot of bad
UPnP implementations.)
The Visual Studio stuff is a little messy, so I apologize if anything is a bit
off. I tested most configurations and it worked.
I also tested CMake on Debian Wheezy, Ubuntu Saucy, and Mac OS X Mountain Lion.
All seemed to be OK.
# By Ryan Houdek (185) and others
# Via degasus (12) and others
* master: (625 commits)
Revert "Don't open/close file for every file operation." as it was crashing PokePark in Windows builds.
Array overrun fixed in VertexShaderCache for the DX11 plugin.
Fixed DSPTool build.
Windows build fix
Go back to assuming every HID device is a wiimote on Windows. Fixed issue 6117. Unfixed issue 6031.
VideoSoftware: Improve fog range adjustment by using less magic and more comments.
revert RasterFont for VideoSoftware
ogl: fix virtual xfb
Windows build fix from web interface...
Adjusted the audio loop criteria, using >= on the Wii and == on GC. This fixes the audio static that occurred in Wii games after hours of play.
Forced the exception check only for ARAM DMA transfers. Removed the Eternal Darkness boot hack and replaced it with an exception check.
VideoSoftware: Implement fog range adjustment, fixing issue 6147.
implement 4xSSAA for OGL
move ogl-only settings into backend
Fix description of disable fog, and move it to enhancements tab.
Reverted rd76ca5783743 as it was made obsolete by r1d550f4496e4.
Removed the tracking of the FIFO Writes as it was made obsolete by r1d550f4496e4.
Forced the external exception check to occur sooner by changing the downcount.
Mark the Direct3D9 backend deprecated.
Prefer D3D11 and OpenGL over D3D9 by default.
...
Conflicts:
CMakeLists.txt
Source/Core/Common/Common.vcxproj.filters
Source/Core/Common/Src/CommonPaths.h
Source/Core/Core/Core.vcxproj.filters
Source/Core/Core/Src/Core.cpp
Source/Core/Core/Src/IPC_HLE/WII_IPC_HLE_Device_FileIO.cpp
Source/VSProps/Dolphin.Win32.props
Source/VSProps/Dolphin.x64.props
Conflicts:
Source/Core/VideoCommon/Src/PixelShaderGen.cpp
Source/Plugins/Plugin_VideoSoftware/Src/SWRenderer.cpp
immediate-removal is a new created branch seperated from master but reverted the revert of immediate-removal
so we get less conflicts by merging
* OpenAL:
Changed SoundTouch to use float samples, allowing SSE to be used. Made the DPL2 decoder disabled by default. Re-added the audio hack used by the Accurate VBeam emulation option.
Added a latency setting to the audio settings. Removed the Sample Rate setting. It is now hardcoded to 48000hz (accurate audio timing).
Skipped timestretching if the emulator is running below 10% speed to prevent buffer overflows.
Removed the synchronisation between the CPU thread and the audio thread. Added code to detect and resume from buffer underruns. Disabled the ability to change the DPL2 option after the game has started. Fixed a memory leak that occurred in the DPL2 decoder. Fixed the OSX build.
Build fix
Added a Dolby Pro Logic II (DPL2) decoder in the OpenAL backend. DPL2 audio is decoded to 5.1. Code adapted from ffdshow. Added an option in the DSP settings to disable the DPL2 decoder in case Dolphin incorrectly detects a 5.1 audio system. Updated the OpenAL files to OpenAL Soft 1.15.1 in the Windows build.
Removed the system timing hack which was activated when the Accurate VBeam option was enabled.
Fixed the include directories in Audio Common for the Windows 32bit build.
Fixed the include directories in Audio Common for the Windows build.
Messed up the static include line
Fix include paths and compiling in Linux. Externals soundtouch is 1.7.1, while Ubuntu 12.10 is 1.6.x. Externals soundtouch is compiled with integer samples, while ubuntu is compiled with float samples. Float samples is probably the more common route. If you're going to use soundtouch, you should probably use SAMPLETYPE instead of explicitly choosing short. This probably breaks the windows build since its includes aren't setup.
OSX: typedef signed char BOOL
OSX build fix
Build fix
Added audio time stretching by using the SoundTouch library.
Implemented correct audio timing.
OpenAL for Windows initial commit
Checking for clang in Xcode bundle seems pointless, command line tools should be installed.
Setting the path explicity to avoid fink/macports/homebrew prevents use of locally installed packages like clang and wxwidgets.
Realistically using opencl means the minimum OSX version targetable is 10.6.
Correct TARGET_SYSROOT check, add required -mmacosx-version-min to linker flags.
also using wxwidgets gl component.
Dolphin code already builds against SDL2 but the build system never
checks for SDL2, which is the what latest SDL is called now. SDL2
replaces SDL 1.3. This allows Dolphin to be build against SDL2, which
activates certain new features such as the haptic interface.
Don't use isascii() - just do it ourselves
Bump required wxw version (for shared libs)
There still seems to be linking issues on some linux distros, I can't reproduce it though...
Specifically:
- Look for clang and clang++ in the new (Xcode 4.3) location first,
then the old (Xcode 4.2) location.
- Look for sysroot in the new (Xcode 4.3) location first, then the old
(Xcode 4.2) location.
Several people had trouble building against systemwide installed libs.
And even if the build succeeds, the resulting bundle would not work on
other Macs.
Our code does not compile when HAVE_XRANDR=1 and HAVE_X11=0.
This combination would not normally exist, but on OS X we skip the X11
check so it is possible for X11 to be "not found" even when the OS does
support it. On OS X 10.6 this was not a problem because XRANDR is not
detected there, but apparently on OS X 10.7 XRANDR is available.
I incorrectly assumed that since wx 2.8.8 lacked wxAuiToolBar, the entire 2.8.x
series lacked it. In fact in wx 2.8.9 this feature was added.
Thanks to Glenn Rice for spotting this issue.
If we are actually missing symbols because a required architecture is missing
from a library, we'll get a link error as usual, so suppressing this warning
is pretty safe.
The "dsptool" executable is not included in the bundle.
The "tester" executable is not included in the bundle and it no longer
installed on other platforms, since it is neither expected nor useful
to install unit tests.
The following changes were made:
Restricted the "-march=core2" option to i386 because the first Intel Macs
had Intel Core CPUs, not Core2.
Removed the "-mdynamic-no-pic" flag as GCC lists it as a PPC specific flag.
Removed "-Wl,-read_only_relocs,suppress" because it seems to be related
to "-mdynamic-no-pic" and I see no need for it.
Removed "-Wextra-tokens -Wnewline-eof" because they are GCC specific and
not OS X specific.
Previously, there was just one list of frameworks regardless of which part
of the code depended on which frameworks. Now we keep separate lists for
the Dolphin core, the Dolphin GUI and internal use by wxWidgets.
Flags in CMAKE_CXX_FLAGS are passed to both compile and link commands.
A cleaner solution would be to use set_source_files_properties().
However, currently there are headers (StdThread.h, maybe more) that contain
Objective syntax. So it is not easy to determine exactly which source files
should be compiled as Objective C/C++ and that set can quickly change when
certain #include directives are modified. The solution for that would be to
move all uses of Objective syntax to implementation (.cpp) files and then
apply set_source_files_properties() to those.
If the systemwide wxWidgets is too old, we can fall back to the version
from Externals instead of letting the build fail.
Note that while the version in Externals appears to be wxWidgets 2.8,
it has post-2.8 features manually added to it (wxAuiToolBar), so the
version check only accepts 2.9 or higher.
Also, don't check to see if a directory is a wad file. They aren't. This removes an annoying and invalid debug assertion with the debug build.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7682 8ced0084-cf51-0410-be5f-012b33b47a6e
Also move the primary translation pot file to the external repository to facilitate updating translations when strings in the code are changed. Now the only time the primary dolphin repository needs to be changed for translations is when a new language is added.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7438 8ced0084-cf51-0410-be5f-012b33b47a6e
Now po files can be updated as often as we want without bumping up the svn revision numbers of dolphin itself. I left the dolphin-emu.pot and primary build files in the primary dolphin-emu svn. The dolphin-emu.pot file will still need to be updated on occasion to reflect changes to strings in the program. The gettextize script will still work as before for this.
Also added Arabic translations to the build thanks to mansoor.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7343 8ced0084-cf51-0410-be5f-012b33b47a6e
