mirror of
https://github.com/dolphin-emu/dolphin.git
synced 2024-12-29 04:10:56 +01:00
84467d2ff1
Current master (d17db57b9d4354752e0af42f5f33007a42ef2906) because Android support was added after the current release (0.8.0-rc1).
64 lines
3.0 KiB
Plaintext
64 lines
3.0 KiB
Plaintext
|
|
There are two implementations of HIDAPI for Linux. One (hid.c) uses the
|
|
Linux hidraw driver, and the other (hid-libusb.c) uses libusb. Which one you
|
|
use depends on your application. Complete functionality of the hidraw
|
|
version depends on patches to the Linux kernel which are not currently in
|
|
the mainline. These patches have to do with sending and receiving feature
|
|
reports. The libusb implementation uses libusb to talk directly to the
|
|
device, bypassing any Linux HID driver. The disadvantage of the libusb
|
|
version is that it will only work with USB devices, while the hidraw
|
|
implementation will work with Bluetooth devices as well.
|
|
|
|
To use HIDAPI, simply drop either hid.c or hid-libusb.c into your
|
|
application and build using the build parameters in the Makefile.
|
|
|
|
By default, on Linux, the Makefile in this directory is configured to use
|
|
the libusb implementation. To switch to the hidraw implementation, simply
|
|
change hid-libusb.c to hid.c in the Makefile.
|
|
|
|
|
|
Libusb Implementation notes
|
|
----------------------------
|
|
For the libusb implementation, libusb-1.0 must be installed. Libusb 1.0 is
|
|
different than the legacy libusb 0.1 which is installed on many systems. To
|
|
install libusb-1.0 on Ubuntu and other Debian-based systems, run:
|
|
sudo apt-get install libusb-1.0-0-dev
|
|
|
|
|
|
Hidraw Implementation notes
|
|
----------------------------
|
|
For the hidraw implementation, libudev headers and libraries are required to
|
|
build hidapi programs. To install libudev libraries on Ubuntu,
|
|
and other Debian-based systems, run:
|
|
sudo apt-get install libudev-dev
|
|
|
|
On Redhat-based systems, run the following as root:
|
|
yum install libudev-devel
|
|
|
|
Unfortunately, the hidraw driver, which the linux version of hidapi is based
|
|
on, contains bugs in kernel versions < 2.6.36, which the client application
|
|
should be aware of.
|
|
|
|
Bugs (hidraw implementation only):
|
|
-----------------------------------
|
|
On Kernel versions < 2.6.34, if your device uses numbered reports, an extra
|
|
byte will be returned at the beginning of all reports returned from read()
|
|
for hidraw devices. This is worked around in the libary. No action should be
|
|
necessary in the client library.
|
|
|
|
On Kernel versions < 2.6.35, reports will only be sent using a Set_Report
|
|
transfer on the CONTROL endpoint. No data will ever be sent on an Interrupt
|
|
Out endpoint if one exists. This is fixed in 2.6.35. In 2.6.35, OUTPUT
|
|
reports will be sent to the device on the first INTERRUPT OUT endpoint if it
|
|
exists; If it does not exist, OUTPUT reports will be sent on the CONTROL
|
|
endpoint.
|
|
|
|
On Kernel versions < 2.6.36, add an extra byte containing the report number
|
|
to sent reports if numbered reports are used, and the device does not
|
|
contain an INTERRPUT OUT endpoint for OUTPUT transfers. For example, if
|
|
your device uses numbered reports and wants to send {0x2 0xff 0xff 0xff} to
|
|
the device (0x2 is the report number), you must send {0x2 0x2 0xff 0xff
|
|
0xff}. If your device has the optional Interrupt OUT endpoint, this does not
|
|
apply (but really on 2.6.35 only, because 2.6.34 won't use the interrupt
|
|
out endpoint).
|