Windows has instructions for building with three possible terminals, if users encounter unexpected errors in following instructions for one of the terminals. These instructions are:
The instructions have been ordered by the performance of their respective terminal. Out of the provided terminals, **WSL1** builds pokeemerald the fastest, and is thus **highly recommended**, but is only available on Windows 10. **msys2** is the second fastest, and **Cygwin** is the slowest. Unscientific benchmarks suggest msys2 is 2x slower than WSL1, and Cygwin is **5-6x** slower than WSL1. For advanced users, **WSL2** is an option and is even faster than **WSL1** if files are stored on the WSL2 file system, but some tools such as [porymap](https://github.com/huderlem/porymap) cannot interact with said files due to problems [outside the control of maintainers](https://bugreports.qt.io/browse/QTBUG-86277).
All of the Windows instructions assume that the default drive is C:\\. If this differs to your actual drive letter, then replace C with the correct drive letter when reading the instructions.
**A note of caution**: As Windows 7 is officially unsupported by Microsoft and Windows 8 has very little usage, some maintainers are unwilling to maintain the Windows 7/8 instructions. Thus, these instructions may break in the future with fixes taking longer than fixes to the Windows 10 instructions.
## Windows 10 (WSL1)
WSL1 is the preferred terminal to build **pokeemerald**. The following instructions will explain how to install WSL1 (referred interchangeably as WSL).
If WSL (Debian or Ubuntu) is **not installed**, then go to [Installing WSL1](#Installing-WSL1). Otherwise, if WSL is installed, but it hasn't previously been set up for another decompilation project, then go to [Setting up WSL1](#Setting-up-WSL1). Otherwise, open WSL and go to [Choosing where to store pokeemerald (WSL1)](#Choosing-where-to-store-pokeemerald-WSL1).
Open [Windows Powershell **as Administrator**](https://i.imgur.com/QKmVbP9.png), and run the following command (Right Click or Shift+Insert is paste in the Powershell).
The next step is to choose and install a Linux distribution from the Microsoft Store. The following instructions will assume Ubuntu as the Linux distribution of choice (Note for advanced users: Debian also works here). Advanced users can pick a preferred Linux distribution, but setup instructions may differ.
Open the [Microsoft Store Linux Selection](https://aka.ms/wslstore), click Ubuntu, then click Get, which will install the Ubuntu distribution. If the link does not work, then open the Microsoft Store manually, and search for the Ubuntu app (choose the one with no version number). If a dialog pops up asking for you to sign into a Microsoft Account, then just close the dialog.
Open **Ubuntu** (e.g. using Search). WSL/Ubuntu will set up its own installation when it runs for the first time. Once WSL/Ubuntu finishes installing, it will ask for a username and password (to be input in). Note that there will be no visible response when typing in the password, but the terminal will still read in input.
- In the terminal, Copy and Paste is either done via
- **right-click** (selection + right click to Copy, right click with no selection to Paste)
- **Ctrl+Shift+C/Ctrl+Shift+V** (enabled by right-clicking the title bar, going to Properties, then checking the checkbox next to "Use Ctrl+Shift+C/V as Copy/Paste").
- Some of the commands that you'll run will ask for your WSL password and/or confirmation to perform the stated action. This is to be expected, just enter your WSL password and/or the yes action when necessary.
Update WSL/Ubuntu before continuing. Do this by running the following command:
```bash
sudo apt update && sudo apt upgrade
```
Note that these commands will likely take a long time to finish.
*Note: If the repository you plan to build was created before 2020/XX/YY (e.g. modifications of pokeemerald that haven't updated) then follow the [legacy WSL1 instructions](docs/legacy_WSL1_INSTALL.md). These repositories can be identified by the [older revision](https://github.com/pret/pokeemerald/blob/571c598/INSTALL.md) of the INSTALL.md*
WSL has its own file system that's not accessible from Windows, but Windows files *are* accessible from WSL. So you're going to want to install pokeemerald within Windows. You'll have to change the **current working directory** every time you open WSL.
For example, if you want to store pokeemerald (and agbcc) in **C:\Users\\_\<user>_\Desktop\decomps**, enter this command:
```bash
cd /mnt/c/Users/<user>/Desktop/decomps
```
Note that the directory **must exist** in Windows. If you want to store pokeemerald in a dedicated folder that doesn't exist (e.g. the example provided above), then create the folder (e.g. using Windows Explorer) before executing the `cd` command.
(The Windows C:\ drive is called /mnt/c/ in WSL. Replace *\<user>* in the example path with your **Windows** username. If the path has spaces, then the path must be wrapped with quotations, e.g. `cd "/mnt/c/users/<user>/Desktop/decomp folder"`. Windows path names are case-insensitive so adhereing to capitalization isn't needed)
If devkitPro is not installed, or is installed but without the GBA Development component, then go to [Installing devkitPro](#installing-devkitpro). If devkitPro is installed, but msys2 hasn't previously been set up for another decompilation project, then go to [Setting up msys2](#setting-up-msys2). Otherwise, open msys2 and go to [Choosing where to store pokeemerald (msys2)](#choosing-where-to-store-pokeemerald-msys2).
Download the devkitPro installer [here](https://github.com/devkitPro/installer/releases).
Run the devkitPro installer. In the "Choose Components" screen, uncheck everything except GBA Development unless if you plan to use devkitPro for other purposes. Keep the install location as C:\devkitPro and leave the Start Menu option unchanged.
### Setting up msys2
Open msys2 at C:\devkitPro\msys2\msys2_shell.bat.
Note that in msys2, Copy is Ctrl+Insert and Paste is Shift+Insert.
Certain packages are required to build pokeemerald. Install these by running the following command:
```bash
pacman -S make gcc zlib-devel git
```
(This command will ask for confirmation, just enter the yes action when prompted).
Change directory to where libpng was downloaded. By default, msys2 will start in the current user's profile folder, located at **C:\Users\\_<user>_**, where *\<user>* is your Windows username. In most cases, libpng should be saved within a subfolder of the profile folder. For example, if libpng was saved to **C:\Users\\_\<user>_\Downloads** (the Downloads location for most users), enter this command:
```bash
cd Downloads
```
(While not shown, msys uses forward slashes `/` instead of backwards slashes `\` as the directory separator. Windows path names are case-insensitive so adhereing to capitalization isn’t needed. If the path has spaces, then the path must be wrapped with quotations, e.g. `cd "Downloads/My Downloads"`. If libpng was saved elsewhere, you will need to specify the full path to where libpng was downloaded, e.g. `cd c:/devkitpro/msys2` if it was saved there)
Run the following command to uncompress and install libpng.
```bash
tar xf libpng-1.6.37
cd libpng-1.6.37
./configure --prefix=/usr
make check
make install
```
Then finally, run the following command to change back to the user profile folder.
```bash
cd
```
### Choosing where to store pokeemerald (msys2)
At this point, you can choose a folder to store pokeemerald into. If so, you'll have to change the **current working directory** every time you open msys2. If you're okay with storing pokeemerald in the user profile folder, then proceed to [Installation](#installation).
For example, if you want to store pokeemerald (and agbcc) in **C:\Users\\_\<user>_\Desktop\decomps**, enter this command:
```bash
cd Desktop/decomps
```
Note that the directory **must exist** in Windows. If you want to store pokeemerald in a dedicated folder that doesn't exist (e.g. the example provided above), then create the folder (e.g. using Windows Explorer) before executing the `cd` command.
If this works, then proceed to [Installation](#Installation).
If devkitPro is not installed, or is installed but without the GBA Development component, then follow the instructions used to [install devkitPro](#installing-devkitpro) for the msys2 setup before continuing. Remember to not continue following the msys2 instructions by mistake!
If Cygwin is not installed, or does not have all of the required packages installed, then go to [Installing Cygwin](#installing-cygwin). If Cygwin is installed, but is not configured to work with devkitPro, then go to [Configuring devkitPro for Cygwin](#configuring-devkitpro-for-cygwin). Otherwise, open Cygwin and go to [Choosing where to store pokeemerald (Cygwin)](#choosing-where-to-store-pokeemerald-cygwin)
Run the Cygwin setup and leave the default settings. At "Choose a Download Site", select any mirror within the Available Download Sites. At "Select Packages", set the view to "Full" (top left) and choose to install the following:
To quickly find these, use the search bar and type the name of each package. Ensure that the selected package name is the **exact** same as the one you're trying to download, e.g. `cmake` is **NOT** the same as `make`.
Double click on the text that says "**Skip**" next to each package to select the most recent version to install. If the text says anything other than "**Skip**", (e.g. Keep or a version number), then the package is or will be installed and you don't need to do anything.
Once all required packages have been selected, finish the installation.
Cygwin has its own file system that's within Windows, at **C:\cygwin64\home\\_\<user>_**. If you don't want to store pokeemerald there, you'll have to change the **current working directory** every time you open Cygwin.
For example, if you want to store pokeemerald (and agbcc) in **C:\Users\\_\<user>_\Desktop\decomps**, enter this command:
```bash
cd c:/Users/<user>/Desktop/decomps
```
Note that the directory **must exist** in Windows. If you want to store pokeemerald in a dedicated folder that doesn't exist (e.g. the example provided above), then create the folder (e.g. using Windows Explorer) before executing the `cd` command.
(Replace *\<user>* in the example path with your **Windows** username. If the path has spaces, then the path must be wrapped with quotations, e.g. `cd "c:/users/<user>/Desktop/decomp folder"`. Windows path names are case-insensitive so adhereing to capitalization isn't needed)
If this works, then proceed to [Installation](#Installation). Otherwise, ask for help on IRC or Discord (see [README.md](README.md)).
If the Xcode Command Line Tools are not installed, download the tools [here](https://developer.apple.com/library/archive/technotes/tn2339/_index.html), open your Terminal, and run the following command:
If devkitPro is not installed, then go to [Installing devkitPro (macOS)](#installing-devkitpro-macos). Otherwise, open the Terminal and go to [Choosing where to store pokeemerald (macOS)](#choosing-where-to-store-pokeemerald-macos)
### Installing devkitPro (macOS)
Download the `devkitpro-pacman-installer.pkg` package from [here](https://github.com/devkitPro/pacman/releases).
At this point, press Enter to confirm the installation. After the tools are installed, devkitPro must now be made accessible from anywhere by the system. To do so, run the following commands:
At this point, you can choose a folder to store pokeemerald into. If so, you'll have to change the **current working directory** every time you open the Terminal. If you're okay with storing pokeemerald in the user folder, then proceed to [Installation](#installation).
For example, if you want to store pokeemerald (and agbcc) in **~/Desktop/decomps**, enter this command:
```bash
cd Desktop/decomps
```
Note that the directory **must exist** in the folder system. If you want to store pokeemerald in a dedicated folder that doesn't exist (e.g. the example provided above), then create the folder (e.g. using Finder) before executing the `cd` command.
Then, follow the instructions [here](https://devkitpro.org/wiki/devkitPro_pacman) to install devkitPro's pacman installer. As a reminder, the goal is to configure an existing pacman installation to recognize devkitPro's repositories.
Once devkitPro pacman is configured, run the following commands:
```bash
sudo pacman -Sy
sudo pacman -S gba-dev
```
Note: the last command will ask for the selection of packages to install. Just press Enter to install all of them, followed by entering Y to proceed with the installation.
At this point, you can choose a folder to store pokeemerald (and agbcc) into. If so, you'll have to change the current working directory every time you open the Terminal.
If this works, then proceed to [Installation](#Installation). Otherwise, ask for help on IRC or Discord (see [README.md](README.md)).
If agbcc has been built before (e.g. if the git clone above fails), but was **last built on a different terminal** than the one currently used (only relevant to Windows, e.g. switching from msys2 to WSL1), then run the following commands to build and install it into pokeemerald:
To build **pokeemerald.gba** for the first time and confirm it matches the official ROM image (Note: to speed up builds, see [Parallel builds](#parallel-builds)):
If an OK is returned, then the installation went smoothly. **Note:** if you switched terminals on Windows since the last build (e.g. from msys2 to WSL1), you must run `make clean-tools` once before any subsequent `make` commands.
**Windows users:** Consider adding an exception for the `pokeemerald` folder in Windows Security using [these instructions](https://support.microsoft.com/help/4028485). This prevents Microsoft Defender from scanning them which might improve performance while building.
See [the GNU docs](https://www.gnu.org/software/make/manual/html_node/Parallel.html) and [this Stack Exchange thread](https://unix.stackexchange.com/questions/208568) for more information.
`nproc` is not available on macOS. The alternative is `sysctl -n hw.ncpu` ([relevant Stack Overflow thread](https://stackoverflow.com/questions/1715580)).
This project supports the `arm-none-eabi-gcc` compiler included with devkitARM. If devkitARM (a.k.a. gba-dev) has already been installed as part of the platform-specific instructions, simply run:
Otherwise, follow the instructions below to install devkitARM.
### Installing devkitARM on WSL1
`gdebi-core` must be installed beforehand in order to install devkitPro (which facilitates the installation of devkitARM). Install this with the following command:
```bash
sudo apt install gdebi-core
```
(If the above command does not work, try the above command but replacing `apt` with `apt-get`).
Once `gdebi-core` is done installing, download the devkitPro software package [here](https://github.com/devkitPro/pacman/releases). The file to download is `devkitpro-pacman.amd64.deb`.
Change directory to where the package was downloaded. For example, if the package file was saved to **C:\Users\\_\<user>_\Downloads** (the Downloads location for most users), enter this command:
Once the directory has been changed to the folder containing the devkitPro package, run the following commands to install devkitPro.
```bash
sudo gdebi devkitpro-pacman.amd64.deb
sudo dkp-pacman -Sy
sudo dkp-pacman -S gba-dev
```
Note: the last command will ask for the selection of packages to install. Just press Enter to install all of them, followed by entering Y to proceed with the installation. `devkitpro-pacman.amd64.deb` is the expected filename of the devkitPro package downloaded (for the first command). If the downloaded package filename differs, then use that filename instead.
Run the following command to set devkitPro related environment variables (alternatively, close and re-open WSL):
### Installing devkitARM on Debian/Ubuntu-based distributions
If `gdebi-core` is not installed, run the following command:
```bash
sudo apt install gdebi-core
```
Download the devkitPro software package [here](https://github.com/devkitPro/pacman/releases). The file to download is `devkitpro-pacman.amd64.deb`.
Change directory to where the package was downloaded. Then, run the following commands to install devkitARM:
```bash
sudo gdebi devkitpro-pacman.amd64.deb
sudo dkp-pacman -Sy
sudo dkp-pacman -S gba-dev
```
Note: the last command will ask for the selection of packages to install. Just press Enter to install all of them, followed by entering Y to proceed with the installation. `devkitpro-pacman.amd64.deb` is the expected filename of the devkitPro package downloaded (for the first command). If the downloaded package filename differs, then use that filename instead.
Run the following command to set devkitPro related environment variables (alternatively, close and re-open the Terminal):
To build using a toolchain other than devkitARM, override the `TOOLCHAIN` environment variable with the path to your toolchain, which must contain the subdirectory `bin`.
