8.8 KiB
Instructions
These instructions explain how to set up the tools required to build pokeemerald, which assembles the source files into a ROM.
If you run into trouble, ask for help on IRC or Discord (see README.md).
Windows 10
WSL1 is the preferred terminal to build pokeemerald. The following instructions will explain how to install WSL1. These steps can be skipped if WSL1 is already installed.
Installing WSL1
Open Windows Powershell as Administrator, and run the following command (Right Click or Shift+Insert is paste in the Powershell).
dism.exe /online /enable-feature /featurename:Microsoft-Windows-Subsystem-Linux /all /norestart
Once the process finishes, restart your machine.
The next step is to choose and install a Linux distribution from the Microsoft Store. The following instructions will assume Ubuntu as the Linux distribution of choice. Advanced users can pick a preferred Linux distribution, but build instructions may differ.
Open the Microsoft Store Linux Selection, click Ubuntu, then click Get, which will install the Ubuntu distribution. If the link does not work, then open the Microsoft Store manually, and search for the Ubuntu app (choose the one with no version number).
Setting up WSL1
Open Ubuntu (e.g. using Search). WSL/Ubuntu will set up its own installation when it runs for the first time. Once WSL/Ubuntu finishes installing, it will ask for a username and password (to be input in). Note that there will be no visible response when typing in the password, but the terminal will still read in input.
A few notes before proceeding:
- In the terminal, Copy and Paste is either done via
- right-click (selection + right click to Copy, right click with no selection to Paste)
- Ctrl+Shift+C/Ctrl+Shift+V (enabled by right-clicking the title bar, going to Properties, then checking the checkbox next to "Use Ctrl+Shift+C/V as Copy/Paste").
- Some of the commands that you'll run will ask for your WSL password and/or confirmation to perform the stated action. This is to be expected, just enter your WSL password and/or the yes action when necessary.
Update WSL/Ubuntu before continuing. Do this by running the following command:
sudo apt update && sudo apt upgrade
Note that these commands will likely take a long time to finish.
Certain packages are required to build pokeemerald. Install these packages by running the following command:
sudo apt install build-essential binutils-arm-none-eabi git libpng-dev
(If the above command does not work, try the above command but replacing apt with apt-get).
WSL has its own file system that's not accessible from Windows, but Windows files are accessible from WSL. So you're going to want to install pokeemerald within Windows. You'll have to change the current working directory every time you open WSL.
For example, if you want to store pokeemerald (and agbcc) in C:\Users\<user>\Desktop\decomps, enter this command:
cd /mnt/c/Users/<user>/Desktop/decomps
Note that the directory must exist in Windows. If you want to store pokeemerald in a dedicated folder that doesn't exist (e.g. the example provided above), then create the folder (e.g. using Windows Explorer) before executing the cd command.
(The Windows C:\ drive is called /mnt/c/ in WSL. Replace <user> in the example path with your Windows username, and the drive letter with the letter of the drive where you want to save pokeemerald. Windows path names are case-insensitive so adhereing to capitalization isn't needed)
If this works, then proceed to Installation.
Otherwise, continue reading below for the older Windows instructions.
Windows
TODO: add general Windows instructions
macOS
TODO: add macOS instructions
Linux
TODO: add Linux instructions
Installation
To download the pokeemerald repository:
git clone https://github.com/pret/pokeemerald
If agbcc isn't built, run the following commands to build and install it into pokeemerald:
git clone https://github.com/pret/agbcc
cd agbcc
./build.sh
./install.sh ../pokeemerald
Otherwise, run the following commands to install agbcc into pokeemerald:
cd agbcc
./install.sh ../pokeemerald
Then, change directory back to the base directory where pokeemerald and agbcc are stored:
cd ..
Now you're ready to build pokeemerald
Build pokeemerald
First, change directory to the pokeemerald folder:
cd pokeemerald
To build pokeemerald.gba for the first time and confirm it matches the official ROM image:
make compare
If an OK is returned, then the installation went smoothly.
To build pokeemerald.gba with your changes:
make
Windows users: Consider adding an exception for the pokeemerald folder in Windows Security using these instructions. This prevents Microsoft Defender from scanning them which might improve performance while building.
macOS users (this is probably outdated): If the base tools are not found in new Terminal sessions after the first successful build, run echo "if [ -f ~/.bashrc ]; then . ~/.bashrc; fi" >> ~/.bash_profile once to prevent the issue from occurring again. Verify that the devkitarm-rules package is installed as well; if not, install it by running sudo dkp-pacman -S devkitarm-rules.
Building guidance
Parallel builds
See the GNU docs and this Stack Exchange thread for more information.
To speed up building, first get the value of nproc:
nproc
Builds can then be sped up by running the following command:
make -j<output of nproc>
Replace <output of nproc> with the number that the nproc command returned.
nproc is not available on macOS. The alternative is sysctl -n hw.ncpu (relevant Stack Overflow thread).
Debug info
To build pokeemerald.elf with enhanced debug info:
make DINFO=1
devkitARM's C compiler
This project supports the arm-none-eabi-gcc compiler included with devkitARM. If devkitARM has already been installed as part of the platform-specific instructions, simply run:
make modern
Otherwise, follow the instructions below to install devkitARM.
Installing devkitARM on WSL1
gdebi-core must be installed beforehand in order to install devkitPro (which facilitates the installation of devkitARM). Install this with the following command:
sudo apt install gdebi-core
(If the above command does not work, try the above command but replacing apt with apt-get).
Once gdebi-core is done installing, download the devkitPro software package here. The file to download is devkitpro-pacman.amd64.deb.
Change directory to where the package was downloaded. For example, if the package file was saved to C:\Users\<user>\Downloads (the Downloads location for most users), enter this command:
cd /mnt/c/Users/<user>/Downloads
(Replace <user> with your Windows username)
Once the directory has been changed to the folder containing the devkitPro package, run the following commands to install devkitPro.
sudo gdebi devkitpro-pacman.amd64.deb
sudo dkp-pacman -Sy
sudo dkp-pacman -S gba-dev
Note: the last command will ask for the selection of packages to install. Just press Enter to install all of them, followed by entering Y to proceed with the installation. devkitpro-pacman.amd64.deb is the expected filename of the devkitPro package downloaded (for the first command). If the downloaded package filename differs, then use that filename instead.
Run the following command to set devkitPro related environment variables (alternatively, close and re-open WSL):
source /etc/profile.d/devkit-env.sh
devkitARM is now installed.
Other toolchains
To build using a toolchain other than devkitARM, override the TOOLCHAIN environment variable with the path to your toolchain, which must contain the subdirectory bin.
make TOOLCHAIN="/path/to/toolchain/here"
The following is an example:
make TOOLCHAIN="/usr/local/arm-none-eabi"
To compile the modern target with this toolchain, the subdirectories lib, include, and arm-none-eabi must also be present.
Useful additional tools
- porymap for viewing and editing maps
- poryscript for scripting (VS Code extension)
- Tilemap Studio for viewing and editing tilemaps